Skip to main content

Daily use of Spottune for store staff

A practical guide for store staff to start music, adjust the right area and check what happened if the sound stops.

Use this guide to get the music going at opening, adjust it during your shift and check a few simple things if the sound stops.

Get to know your store’s setup

  • Stream is the unit that sends audio to the speakers. Its front panel has controls for volume, zones and playback.

  • Zone means a group of speakers you can control together. For example, the sales floor might be Zone 1 and the fitting rooms Zone 2. Ask your manager which zones and Streams serve your store.

  • Source is where the music comes from. Your store might use a separate music player connected to AUX, files on a USB drive, or music played through Spottune Cloud.

At opening, check that music is playing

  1. Listen in the areas that should have music. If your store uses a schedule, it may already be playing.

  2. If the music is paused, resume it where your store normally controls playback.
    For AUX, press Play on the connected music player.
    For USB playback on the Stream, press Play/Pause on the Stream.
    If your store uses Spottune Cloud, open the correct location and Stream and use its playback controls.

  3. Listen again in the customer area to confirm the music has started at the expected level.

If you are unsure which source your store uses, check the Stream display and ask your manager before switching inputs. See the available Stream inputs.

During your shift, adjust the area that needs it

For example, if the fitting rooms are too loud, find the Stream and zone for the fitting rooms first.

On the Stream, press Zone until the display shows that zone, then tap − and listen in the fitting rooms.

Use Zone 1+2 when you intend to adjust both zones together.

If you use Cloud, check which Stream and zone you are controlling before you adjust the volume.

To pause briefly, use the same player or playback control you used to start the music.

If your manager asks you to change the music and you have access to the Cloud Content Selector, follow the guide for starting a playlist or starting a streaming service.

If the music stops

  1. Listen in another area. This tells you whether the issue affects one area or several.

  2. Check playback and volume. Confirm that the usual player is playing and that the affected zone is selected and turned up. If you use AUX, check that the audio cable is seated at both ends.

  3. Tell your manager what you found. Include the affected areas, when the sound stopped and what you checked. For the next checks, see My speakers are not playing.

At closing, follow your store’s routine

If your store has an automatic closing schedule, let it stop the music. If your team stops music manually, pause it from the usual player or playback controls.

Tell the next shift about any temporary volume changes or sound issues they should know about.

Did this answer your question?