Button Overview & Functionality
1. Power Button
Turns the Stream on or off.
Tip: The Stream powers on automatically if connected to an outlet.
2. Zone Button
Cycles through audio zones: Zone 1 → Zone 2 → Combined Zone 1+2.
Use this to control which zone your input and volume apply to.
3. Source Button
Switches the active input source for the selected zone (e.g., AUX, USB, Ethernet).
4. Volume Buttons
Adjusts volume up or down for the selected zone in real time.
5. Play/Pause Button
Controls playback when using USB or Ethernet input.
Press to play or pause the current track.
6. Back / Forward Buttons
Navigate between tracks when using USB or Ethernet input.
Use Back to go to the previous track, Forward to skip ahead.
7. Microphone Button
Press and hold to activate the built-in mic for announcements.
Speak clearly toward the mic — located under the button.
⚠️Note: The built-in Microphone is only for demo purposes. Please use an external microphone, with the microphone input in installation cases.
Quick Reference Table
Button | Function |
Power | Turns device on/off (auto-on if powered via timer) |
Zone | Switch between Zone 1, Zone 2, or combined Zone 1+2 |
Input | Change audio input source for the active zone |
Volume (+ / –) | Adjusts volume level for the active zone |
Play / Pause | Controls audio playback on USB or Ethernet sources |
Back / Forward | Navigate tracks on USB or Ethernet sources |
Microphone | Hold to make announcements using the built-in mic |
Tips & Important Notes
To change zones quickly, use the Zone button—this allows separate control over different areas.
Play/Pause and Back/Forward buttons only work with USB and Ethernet inputs. They do not function when AUX is selected as the input.
The Microphone input has priority over all other audio. Any music playback will mute as soon as the mic is activated.