Step-by-Step Guide
Step 1: Cut Ceiling Opening
Cut a circular opening in the ceiling to the kit’s required diameter.
For the technical specifications, read our spec sheet on the Omni Recessed Kit.
Step 2: Insert Recessed Housing
Push the recessed housing through the opening and secure the spring-mounted clamps or brackets to the ceiling:
Mid version requires deeper recess depth
Low version fits shallower ceilings
Step 3: Connect Mains Power
Route a fixed AC supply to the recessed housing and link it to the Omni’s internal connection point (via terminal or connector in the kit).
Step 4: Mount the Omni Speaker
Seat the Omni speaker flush into the recessed housing. Ensure the grille aligns evenly with the ceiling surface.
Step 5: Pairing with Stream
On first use, the unit enters pairing mode automatically (LED blinking).
If not, access the pairing button and press and hold 5 seconds to activate pairing.
⚠️ Important Notes
Ensure sufficient clearance behind the ceiling for the speaker body and heat dissipation.
Avoid metal framing or large structural elements immediately adjacent to the unit which may block signal.
Maintain an unobstructed path from the internal antenna (logo side) to the Stream.