Step-by-Step Guide
Step 1: Unpack and Inspect
Ensure the unit includes the Omni Cord speaker, its attached power cord (5 m).
Step 2: Route the Power Cable
Lay or fix the 5 m power cord from your mains connection to the location where the speaker will be mounted.
Step 3: Mount the Omni Cord
Use the included mounting bracket or ceiling mount plate to secure the speaker housing in place (ceiling, track bracket, or wall). Ensure it's fixed firmly.
Step 4: Connect to Mains
Attach the power plug to a standard 100–240 V AC outlet. Confirm earth/ground is correct and stable. The Unit is not supplied with a power plug.
Step 5: Pairing with Stream
If this Omni Cord has never been paired, it will boot into pairing mode automatically with a blinking green LED.
If not, press and hold the pair button on top of the speaker for 5 seconds to activate pairing mode.
⚠️ Important Notes
Route the power cord away from signal cables to minimize interference.
Ensure the mains wiring is stable and supports the speaker’s consumption.
Make sure the speaker is not obstructed and antenna side (logo side) faces toward the Stream for best possible connection.