Skip to main content

The Buttons on Your Omni Speaker

The Spottune Omni speaker is designed for easy use and setup. On the topof the speaker you will two buttons that allow you to adjust basic functions without additional tools or configuration. This guide explains what the buttons do and how to use them.

Updated over a month ago

Button Overview

  • Zone Button

    • Used to assign the speaker to a Stream Zone.

    • Press once and hold for 3 seconds to switch to the next available zone.

    • The Zone Indicator will switch to confirm the change.

  • Pair Button

    • Used to enable Pairing Mode on your Omni.

    • Press and hold for 5 seconds to enable Pairing Mode.

    • Press and hold for 30 seconds to perform a Factory Reset. This will reset the Stream to Factory Settings, and make the Omni forget earlier pairings.

    • In most cases, pairing is automatic, but this button can be used if manual re-pairing is needed

⚠️ Important Notes

  • If never paired before the Omni Speaker will automatically pair with the nearest Stream; manually enabling pairing mode is required if the Omni has been paired before, or in relation to Troubleshooting your Spottune System.

  • A Factory Reset is only necessary in relation to Troubleshooting your Spottune System.

Did this answer your question?