Skip to main content

How to Enable Spotify Connect on your Spottune Stream

By default, Spotify Connect is disabled on the Spottune Stream. If your project requires Bluetooth playback, you can enable it from the Spottune Cloud HQ. This guide shows you How to Enable Spotify Connect from the Cloud HQ.

Updated this week

How to Sign In to Spottune Cloud

⚠️ You need an an active Cloud HQ account to access the Spottune Cloud features. If you do not have a Cloud HQ account yet, read our article on How to receive Cloud HQ Access

Log into Spottune Cloud HQ

Disclaimer ⚠️ – Use of Spotify Connect

Spotify Connect is intended for consumer use and testing purposes only. It is not designed or licensed for use in commercial environments.

Please be aware that the use of Spotify Connect in commercial settings (including, but not limited to, retail, hospitality, and other public-facing environments) may violate applicable copyright and licensing regulations. Spottune does not provide any rights or licenses for the public performance of music via Spotify.

For this reason, Spottune strongly recommends not using Spotify Connect in commercial environments.

Any use of Spotify Connect in a commercial context is therefore at your own discretion and risk. It is the sole responsibility of the user to ensure that all necessary rights and licenses for public music playback are obtained and complied with.

  1. Enter the Stream

    Find the location where you want do Enable Spotify Connect, and press the Stream.

  2. Enter Stream Settings

    Enter the Stream Settings by pressing the settings wheels, in the top right hand corner.

  3. Enable Spotify Connect

    Enable Spotify Connect, by pressing the slider.

  4. Confirm the Setting

    Confirm the Setting, by pressing the "Save & Exit"-button.

    The Stream will now reboot, and will be ready to use within a few minutes. When rebooted, the Stream will be available under "Devices" in the Spotify App.

Did this answer your question?