No Light / Off
There is no power to the speaker.
White
The speaker is booting up.
Green
Flashing
The speaker is in pairing mode and looking for a Stream to connect to.
Steady
The connection has been established, and the speaker is ready to play audio.
Red
Flashing
The speaker is not connected to a Stream.
Steady
The speaker is connected to a Stream, but is not receiving any audio input.
Yellow
The speaker is undergoing a factory reset.
Blue-Purple
When the LED is displaying a blue-purple LED, it means that the Omni has been booted up in "engineering mode". When the speakers is engineering mode, you will experience that the Spottune Omni is playing at full volume, and that you are unable to control the volume on this Speaker on the Stream.
To exit engineering mode simply reboot the Speaker; Do this by unplugging it from power, and afterwards powering it on again.
When powering the speaker on again, it is important that you are not holding down any of the Omni Buttons.