Skip to main content

How to Setup Your Spottune Stream

Proper setup ensures reliable operation, updates, and Cloud integration. This guide shows how to assemble your Spottune Stream step-by-step.

Updated over a month ago

Step-by-Step Guide to Assembling the Spottune Stream

Step 1: Check the Box Contents
Ensure that your package includes the following items:

  • Spottune Stream unit

  • Power supply

  • Two external antennas


Step 2: Mount the Antennas
Screw the two antennas into the ANT1 and ANT2 ports on the rear of the Stream. Make sure the antennas are fully fastened.

  • The antennas must be mounted in a V-formation (angled slightly apart). This ensures optimal wireless signal strength and stability.


Step 3: Connect the LAN Cable
Plug one end of a LAN cable into the Stream’s Ethernet port (LAN) and the other into your local network. This is required for enabling Spottune Cloud features, streaming services, and firmware updates.


Step 4: Insert a USB Drive (Optional)
Insert a USB flash drive loaded with music files (supported formats: .ogg, .mp3, .flac, .mp4, .m4a, .wma, .wav, .ra, .rm, .m4b, .aif, .aiff, .aifc, .dsf). It can act as a backup music source or cache in case of network interruptions.


Step 5: Connect an AUX Cable (Optional)
If needed, plug in a 3.5 mm audio cable into the AUX IN port on the back to use analog audio sources, such as a tablet or mixer.


Step 6: Power On the Unit
Connect the included power supply to the Spottune Stream. The unit will power up automatically and display its operational interface on the OLED screen.


Quick Reference Table

Step

Action

Purpose

1

Check box contents

Confirm all components are present

2

Mount antennas (V-form)

Ensures optimal wireless coverage

3

Connect LAN cable

Required for cloud access and updates

4

Insert USB (optional)

Acts as music source or offline buffer

5

Connect AUX (optional)

Supports analog audio input

6

Power on Stream

Starts up the device and enables functionality


Important Notes

  • Antennas must always be mounted in a V-formation. This provides the most stable DECT coverage.

  • LAN connection is strongly recommended for stable access to cloud features and updates.

  • USB and AUX are optional but provide backup and flexibility.

  • The unit powers on automatically once connected to power.

Did this answer your question?